HIKVISION DS-K1104MK User Manual

DS-K1100 Series Card Reader
vii
reader, you must use RVVP cable above 0.5 to connect them.
 If the card reader is installed outside or in environment easy to
permeable, it is advisable to install a waterproof shield.
 If you need to install several card readers, the distance among them
must over 30cm.
 To reduce the noise in long distance transmission, the shield of cable
should connect to the GND of both controller and card reader
terminal.

HIKVISION DS-K1104MK Specifications

General

Quantity per pack	1 pc(s)
Internal	No
Product color	Black, Silver
Built-in processor	Yes
Compatible memory cards	-
RS-485 ports	1
Type	Basic access control reader
Certification	FCC, CE
LED indicators	Status
RFID frequency	13.56 MHz
Authentication type	Access chip/card, Password
Supported protocols	Mifare
Keypad number of keys	12
RFID reading distance	50 mm
International Protection (IP) code	IP65
Operating temperature (T-T)	-20 - 65 °C
Operating relative humidity (H-H)	10 - 90 %
Power consumption	0.5 mA

Weight and Dimensions

Depth	23 mm
Width	76 mm
Height	118 mm
Weight	520 g