HIKVISION DS-K1T673 Series - Page 135

5) Oponal: Click to delete the congured me duraon.
6.
Set the me duraon when authencaon failed.
1) Click Add Time Duraon.
2) Set the
me duraon.
Note
If authencaon is failed in the congured me duraon, the device will broadcast the
congured content.
3) Set the audio content.
4) Oponal: Repeat substep 1 to 3.
5)
Oponal: Click to delete the congured me duraon.
7.
Click Save to save the sengs.
Customize Prompt Voice
You can customize prompt voices for the device.
Steps
1.
Click Conguraon → Preference → Custom Prompt .
2.
Click → and import audio le from local PC according to your actual needs.
Note
The uploaded audio le should be less than 512 kb, in WAV format.
Congure Authencaon Result Text
Steps
1.
Go to
Conguraon → Preference → Authencaon Result Text .
2.
Enable Customize Authencaon Result Text.
3.
Enter custom texts.
4.
Click Save.
Set
Authencaon Indicator
You can set authencaon indicator parameters.
Steps
1.
Click Conguraon → Preference .
2.
You can enable White Indicatoror Red and Green Indicator. If you enable and set the brightness
and indicator mode for white indicator.
Red and Green Indicator
DS-K1T673 Series Face Recognion Terminal User Manual
121