HIKVISION DS-K1T803F User Manual

Fingerprint Access Control Terminal·User Manual
1
Chapter 1 Overview
1.1 Introduction
DS-K1T803 Series and DS-K1T804 Series Fingerprint Access Control
Terminal is designed with a 2.4-inch LCD display screen. Offline
operation, wired network (TCP/IP) and wireless network
transmission modes are supported as well. (The models with -1 do
not support the wireless network function.)
Note: The figure on the left is for reference only. Refer to the
actual product as the standard.
1.2 Main Features
1.2.1 DS-K1T803F/MF/EF/MF(L) and DS-K1T804F/MF/EF Features
 Doorbell ringtone settings function
 2.4-inch LCD display screen
 Transmission modes of wired network (TCP/IP) and wireless network
 Max. 3,000 users, 3,000 fingerprints and 100,000 access control events storage
 Export the report and upgrade the device via the USB disk.
 Adopts the optical fingerprint module, supporting 1:N mode (fingerprint, card + fingerprint)
and 1:1 mode (card + fingerprint) (DS-K1T803F and DS-K1T804F does not support swiping
card.)
 Multiple authentication modes: card, fingerprint, card + fingerprint, card + password,
fingerprint + password, card + fingerprint + password, terminal authentication, user
authentication and so on. (DS-K1T803F and DS-K1T804F does not support swiping card.)
 EM card reading (DS-K1T803EF/DS-K1T804EF)
 Mifare card reading, including card No. reading (DS-K1T803MF/DS-K1T804MF)
 CPU card reading, including CPU card serial No
 Secure door control unit accessing via RS-485 connection

HIKVISION DS-K1T803F Specifications

General

Brand	HIKVISION
Model	DS-K1T803F
Category	IP Access Controllers
Language	English