HIKVISION DS-K1T803F User Manual

Fingerprint Access Control Terminal·User Manual
24
4.4.1 Adding User
You can add users by editing the ID No., the user name, the card No. You can also scan the user
fingerprint, set the password, the department, the role, the schedule template, the authentication
mode and the duress card.
Steps:
1. Press the key to enter the New (new user) interface and input the ID No.
Notes:
 The ID No. refers to the user attendance serial No.
 The ID No. should be between 1 and 99999999 and should not start with 0.
 The ID No. can be used for once.
 By default, the ID No. will be increased in sequence.

HIKVISION DS-K1T803F Specifications

General

Brand	HIKVISION
Model	DS-K1T803F
Category	IP Access Controllers
Language	English