Fingerprint Access Control Terminal·User Manual
149
Appendix C Attendance Record Delete
Rule
C.1 Enabling Record Delete
You are able to configure the percentage of the attendance record over threshold prompt.
1) When the record reaches the threshold, an alarm of the attendance record over limit value will
be displayed on device screen. The alarm information is: Log will be full, export the report.
Card authentication is available. The interface will be back to the alarm interface after
authenticating.
2) When the record is full, an alarm of the attendance record over limit value will be displayed on
the device screen. The alarm information is: Log is full, export the report. Card authentication
is available. And the first 3000 attendance records will be deleted automatically. The interface
will be back to the alarm interface after authenticating.
3) Deleting by time and deleting all are available when deleting the attendance records.
C.2 Disabling Record Delete
You are able to configure the percentage of the attendance record over threshold prompt.
1) When the record reaches the threshold, an alarm of the attendance record over limit value will
be displayed on device screen. The alarm information is: Log will be full, export the report.
Card authentication is available. The interface will be back to the alarm interface after
authenticating.
2) When the record is full, an alarm of the attendance record over limit value will be displayed on
the device screen. The alarm information is: Log is full, export the report. Card authentication
is available. And there will be no new attendance records added. The interface will be back to
the alarm interface after authenticating.
3) Deleting by time and deleting all are available when deleting the attendance records.
To Next Page
Loading...
Need help?
General
