Fingerprint Access Control Terminal·User Manual
153
Man-Hour Shift Table: Set the Man-Hour Shift working duration. If set the Latest
Start-Work Time to 0, all users are attendant. If set the Latest Start-Work Time to more
than 0, the user will be absent by taking attendance after the configured time.
For example: If set the working duration to 6 hours, the start-work time to 09:00, the
end-work time to 17:00 and the break period is from 12:00 to 13:00, the user actual
working hour is 17:00 - 09:00 - (13:00 - 12:00).
Abnormal Attendance
Create Time: 2017-04-26 11:12:20 SW: Start-Work EW: End-Work
Early
Leave
Duration
(min)
Abnormal Attendance Record Table: Calculate the abnormal attendance according to the
attendance records and the shift schedule configuration.
1. Employee ID: The user's ID No.
2. Card No.: The user’s card No.
3. Name: The user's name.
4. Department: The department of the user.
5. Date: The date of the data generated.
6. SW-EW: Up to 4 periods can be configured. It records the attendance time of each user
every day.
7. Late Duration (min): The start-work attendance time is later than the normal start-work
time.
8. Early Leave Duration (min): The end-work attendance time is earlier than the normal
end-work time.
9. Total: The absence time duration of the day.
Attendance Record
Create Time: 2017-04-24 19:17:25 SW: Start-Work EW: End-Work
To Next Page
Loading...
Need help?
General
