HIKVISION DS-K1T803F User Manual

Fingerprint Access Control Terminal·User Manual
22
Data Only:
attendance data by time.
Delete User Only:
Delete all user data in the device, including the attendance
records.
Clear Permission:
Clear the admin management permission. The admin will
turn to the normal user. The user will not be deleted.
Restoring Settings
Purpose:
You can restore Factory Defaults or Default Settings.
Steps:
1. Move the cursor to Reset and press the OK key to enter the Reset interface.
Figure 1. 1 Reset Interface
2. Select Factory Defaults or Default Settings.
Factory Defaults:
All parameters of the device will restore to the factory
condition.
Default Settings:
All parameters, excluding the communication parameters
and the remote user management, will restore to the factory
condition.

HIKVISION DS-K1T803F Specifications

General

Brand	HIKVISION
Model	DS-K1T803F
Category	IP Access Controllers
Language	English