Do you have a question about the HIKVISION DS-K1T804BEF and is the answer not in the manual?
Model | DS-K1T804BEF |
---|---|
Type | IP Access Controller |
Camera | 2 MP |
Communication | TCP/IP, RS-485 |
Power Supply | 12 VDC/2 A |
Dimensions | 135mm × 105mm × 25mm (5.31" × 4.13" × 0.98") |
Operation System | Linux |
Fingerprint recognition duration | < 1s |
FAR (False Acceptance Rate) | ≤ 0.001% |
Fingerprint comparing mode | 1:1, 1:N |
Fingerprint capacity | 3000 |
Reading frequency | 13.56 MHz |
Card type | Mifare card |
Working humidity | 10% to 90% (non-condensing) |
Installation | Wall-mounted |
Language | Multi-language support |
Reader Interface | Wiegand |
Operating Humidity | 10% to 90% (non-condensing) |
Card Reader | Built-in card reader |
Operating Temperature | -10 °C to +55 °C (14 °F to +131 °F) |
Event capacity | 100000 |
Working temperature | -10°C to 55°C (14°F to 131°F) |
Communication Interface | RS-485 |
Wiegand Signal | Wiegand 26/34 |