HIKVISION DS-K3BC430LX Series - 7.5 Configuration; 7.5.1 View Device Information; 7.5.2 Set Time and DST

7.5 Conguraon
7.5.1 View Device Informaon
Click Conguraon → System → System Sengs → Basic Informaon to enter the conguraon
page.
You can view the device name, language, model, serial No., version, IO input, IO output, and local
RS-485 number.
You can change Device Name and click Save.
You can view the device capacity, including person, card and event.
7.5.2 Set Time
Set the device's me zone, synchronizaon mode, server address, NTP port, and interval.
Click
Conguraon → System → System Sengs → Time Sengs .
Figure 7-4 Time Sengs
Click Save to save the sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
DS-K3BC430LX Series Swing Gate
33