EasyManua.ls Logo

HIKVISION DS-K3BC430LX Series - 7.5.7 Network Settings

HIKVISION DS-K3BC430LX Series
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7.5.6 View Device Arming/Disarming Informaon
View device arming type and arming IP address.
Go to
Conguraon → User Management → Arming/Disarming Informaon .
You can view the device arming/disarming informaon. Click Refresh to refresh the page.
7.5.7 Network Sengs
Set TCP/IP and HTTP(S).
Set Basic Network Parameters
Click Conguraon → Network → Network Sengs → TCP/IP .
Figure 7-5 TCP/IP Sengs Page
Set the parameters and click Save to save the sengs.
NIC Type
Select a NIC type from the drop-down list. By default, it is Auto.
DHCP
If you uncheck the funcon, you should set the IPv4 address, IPv4 subnet mask, IPv4 default
gateway, Mac address, and MTU.
If you check the
funcon, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4
default gateway
automacally.
DS-K3BC430LX Series Swing Gate
35

Table of Contents

Related product manuals