HIKVISION DS-K3BC430LX Series - Page 58

2.
Set Alarm Output Duraon.
Note
The alarm output duraon ranges from 0 s to 3599 s.
3.
Set Temperature Unit.
4.
Drag the block or enter the value to adjust the light board brightness.
5.
Set the alarm buzzer beeping
duraon, door closing delay me.
6.
Choose the control mode.
So Mode
The barrier will be closed aer the person has passed through the barrier.
Guard Mode
The barrier will be closed immediately.
7.
Set the
re input type.
8.
Click to enable Motor Self-Test and choose the main lane or sub lane to start motor self-tesng.
9.
Click Save.
10.
Click More to adjust Barrier Open Angle.
DS-K3BC430LX Series Swing Gate
46