HIKVISION DS-KD3003-E6 - Page 50

The default port number is 554 and it can be changed to any port No. ranges
from 1 to 65535.
Server Port
The default server port number is 8000, and it can be changed to any port
No. ranges from 2000 to 65535.
3.
Click Save to enable the sengs.
SIP Seng
Steps
1.
Click Network → Basic Sengs → SIP to enter the sengs page.
2.
Check Enable VOIP Gateway.
3.
Congure the SIP parameters.
4.
Click Save to enable the sengs.
SNMP Sengs
Before You Start
Before seng the SNMP, please download the SNMP soware and manage to
receive the camera informaon via SNMP port. By seng the Trap Address, the
camera can send the alarm event and
excepon messages to the surveillance center.
Steps
1.
Click Network → Advanced
Sengs → SNMP to enter the sengs page.
Video Intercom D Series Door
Staon User Manual
37