HIKVISION DS-KD9203-FE6

Name Terminal Descripon
DOOR NC1 Door Lock Relay Output 1(Normally
Close)
COM1 Common Interface 1
NO1 Door Lock Relay Output 1(Normally
Open)
GND Grounding
NC2 Door Lock Relay Output 2(Normally
Close)
COM2 Common Interface 2
NO2 Door Lock Relay Output 2(Normally
Open)
GND Grounding
Power Supply DC 12 V 12 VDC Power Input
Note
•
Alarm input in
terface cannot be edited. Refers to the actual model.
•
You can only wire the SEN1/SEN2 terminal with the door contact. And wire the
BTN1/BTN2 terminal with the exit buon.
2.2 Wiring
Descripon
2.2.1 Door Lock Wiring
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
5