Figure 2-2 Door Lock Wiring
Note
•
Terminal NC1/COM1 is set as default for accessing electric bolt. Terminal NO1/
COM1 is set as default for accessing electric strike.
•
To connect electric lock in terminal NO2/COM2/NC2, it is required to set the
output of terminal NO2/COM2/NC2 to be electric lock with iVMS-4200 Client
Soware.
2.2.2 Exit Buon Wiring
Wire the BTN1/BTN2 terminal with the door contact.
Here takes BTN1 for example.
Figure 2-3 Exit
Buon Wiring
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
6
To Next Page
Loading...
