HIKVISION DS-KH9310-WTE1 Configuration Guide

3 Remote Operaon via the client
soware
The Video Intercom module provides remote control and conguraon on video
in
tercom products via the iVMS-4200 client soware.
3.1 Acvate Device Remotely
You can only congure and operate the indoor staon
aer creang a password for
the device acvaon.
Before You Start
Default parameters of indoor staon are as follows:
•
Default IP Address: 192.0.0.64.
•
Default Port No.: 8000.
•
Default User Name: admin.
Steps
1.
Run the client soware, enter De
vice Management, check the Online Device
area.
2.
Select an inacvated device and click the Acvate.
3.
Cr
eate a password, and
conrm the password.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security
system, changing the password monthly or weekly can beer protect your
product.
4.
Click OK t
o acvate the device.
3.2 Device Management
Video Intercom 9 Series Indoor Staon
Conguraon Guide
15

HIKVISION DS-KH9310-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH9310-WTE1
Category	Intercom System
Language	English