HIKVISION DS-KH9310-WTE1 - Client Software Log and Notice Management; View Call Logs via Client; Release Notice via Client

RS-485
Click R
S485 to enter the RS-485 sengs page. You can view and edit the
RS-485 parameters of the device.
Figure 3-7 RS-485 Sengs
Note
For indoor staon and master
staon, there are 3 choices for the working
mode: transparent channel, disable, and custom.
3.4.2 Video Intercom
Click Video In
tercom on the remote conguraon page to enter the video intercom
parameters sengs: Device Number Conguraon, Time Parameters, Password,
Zone Conguraon, IP Camera Informaon, and Volume Input and Output
Conguraon, and so on.
Time Parameters
Steps
1.
Click Time Parameters to enter me parameters sengs page.
Video Intercom 9 Series Indoor Staon Conguraon Guide
24