HIKVISION DS-KH9310-WTE1 Configuration Guide

Note
Default admin password is the acvaon password.
2.
T
ap + to pop up the dialog box.
3.
Tap Camera and OK to add.
Figure 2-6 Add Camera
4.
Enter the device name and IP address.
5.
Enter the port No. and channel No.
6.
Enter the user name and password of the camera.
7.
Tap √ to add the camera.
2.2.5 Zone and Alarm Sengs
Zone
Sengs
You can set the zone type, alarm type and delay me and other parameters of 8
z
ones.
Before You Start
Tap Sengs →
→ Shortcut Sengs to enable Zone Alarm Locally funcons.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable
alarm
funcon rst.
Video Intercom 9 Series Indoor Staon Conguraon Guide
6

HIKVISION DS-KH9310-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH9310-WTE1
Category	Intercom System
Language	English