HIKVISION DS-KV8402-IM User Manual

Video Intercom Door Station·User Manual
33
1. Click the Local Network Configuration button to enter local network configuration
interface.
Figure 7-28 Local Network Parameters
2. Enter the local IP address, subnet mask, gateway address, and port No..
3. Click the Save button to enable the settings.
 The default port No. is 8000.
 After editing the local network parameters of device, you should add the devices
to the device list again.
Linked Devices Network Configuration
Purpose:
In the linked devices network configuration interface, you can configure the network
parameters of master stations, SIP servers and management centers of the same LAN.
The devices can be linked to the door station and realize the linkage between these
devices.
Steps:
1. Click the Linked Network Configuration button to enter linked network configuration
interface.
Figure 7-29 Linked Network Configuration
2. Enter the master station IP address, (main) door station IP address, SIP server IP
address, management center IP address, and doorphone IP address.
3. Select the main door station type from the drop-down list.
4. Click the Save button to enable the settings.

HIKVISION DS-KV8402-IM Specifications

General

Brand	HIKVISION
Model	DS-KV8402-IM
Category	Intercom System
Language	English