HIKVISION DS-KV8402-IM User Manual

Video Intercom Door Station·User Manual
50
When starting the live view of door station via iVMS-4200, you can capture the live view
picture. The captured picture can be uploaded and stored in the storage server.
 This function is only available to door stations.
 You are required to add storage server to the iVMS-4200, and format the HDDs
first before uploading and storing captured pictures.
8.4.1 Adding Storage Server
Before you start:
The storage server application software needs to be installed and it is packed in the
iVMS-4200 software package. When installing the iVMS-4200, check the checkbox of
Storage Server to enable the installation of storage server.
1. Click the icon on the desktop to run the storage server.
2. Open the Device Management page and click the Server tab.
3. Click Add New Device Type, select Storage Server and click OK.
Figure 8-8 Adding Storage Server Type
4. Click Storage Server on the list to enter the Storage Server Adding interface.
For adding the storage server, please refer to User Manual of iVMS-4200 (Video
Intercom) V2.4.2 in the disk.

HIKVISION DS-KV8402-IM Specifications

General

Brand	HIKVISION
Model	DS-KV8402-IM
Category	Intercom System
Language	English