HIKVISION DS-MCW406

6.6.4 Set Audio Encoding Type
The audio encoding type will aect the quality of audio.
Steps
1.
Select Set → Camera → Intercom Audio .
2.
Select audio encoding type according to your needs.
What to do next
Reboot the device to take the new
sengs into eect.
6.7 Set Capture Parameters
You can set the captured picture
resoluon.
Steps
1.
Select Set → Camera → Picture Quality .
2.
Select the picture
resoluon.
6.8 Set OSD
You can set the overlay informaon on the videos and pictures.
Steps
1.
Select Set → Camera → Mtext OSD .
2.
Enable Mtext OSD.
3.
Select OSD to set OSD
informaon.
Result
The OSD
informaon will be overlaid on the videos and pictures.
6.9 Set Pre-Record
You can set the me to record before the recording start me.
Steps
1.
Select Set → Camera → Record Param. → Pre-Record .
2.
Select the pre-record
duraon.
6.10 Set Post-Record
You can set the me to record aer the recording end me.
Body Camera User Manual
13