HIKVISION DS-MCW406

7.9 Restore Basic Sengs
If there is device excepon due to the wrong set parameters, you can restore the basic sengs.
Steps
1.
Select Set → System → System → Restore
sengs .
2.
Enter the device password.
3.
Select OK on the popup window.
Result
The device will reboot
automacally. The parameters except the network parameters, device
password, etc. will be restored to the factory sengs.
7.10 Restore Factory
Sengs
If there is device excepon due to the wrong set parameters, you can restore factory sengs.
Steps
1.
Select Set → System → System → Restore to Factory .
2.
Enter the device password.
3.
Select OK on the popup window.
Result
The device will reboot automacally. All the parameters will be restored to the factory sengs.
7.11 Shut down and Sleep
7.11.1 Shut down
Aer the device starts up, hold the startup/shutdown buon on the device side to shut it down.
7.11.2 Shut down Forcedly
If the device cannot be shut down normally, you can hold the startup/shutdown buon on the
device side for 15 seconds to shut it down forcedly.
7.11.3 Sleep Manually
Aer the device starts up, press the startup/shutdown buon on the device side to sleep the
device.
Body Camera User Manual
18