HIKVISION DS-MCW406

7.11.4 Sleep Automacally
You can set the device to sleep automacally to save power if there is no operaon within a certain
me.
Steps
1.
Select Set → System → Power Supply → Auto-Lock .
2.
Select me.
Note
If you select OFF, the screen will always on no maer if there is operaon or not.
Result
If no operaon is done within the set me, the device will sleep automacally.
7.11.5 Wake up
When the device is sleeping, you can press any buon on both the device sides to wake it up.
Body Camera User Manual
19