HIKVISION DS-MCW406

7.6 Upgrade
You can upgrade the device version.
Before You Start
●
Import the upgrade
le to the root directory of the device storage media.
●
Ensure the device
baery power is larger than 20%.
Steps
1.
Select Set → System → System → System Update .
2.
Enter the device password.
3.
Select OK.
Result
The device starts to upgrade.
Aer upgrade nishes, the device will reboot automacally.
7.7 Export Debug Log
You can export the device debug log to view the log informaon.
Steps
1.
Select Set → System → System → System Info.
2.
Press the OK
buon below the screen 3 mes connuously to enter the debug log page.
3.
Enable Debug Log.
Result
The debug log will be automacally exported to the debuglog directory of the device storage
media. You can switch to USB mode to view the log.
Note
If the debug log is not disabled manually aer enabled, it will be automacally disabled aer the
device works for 7 days by default.
7.8 Set Satellite Time Synchronizaon
You can synchronize the device me with the satellite me when the device me is not accurate.
Before You Start
Posioning has been enabled, and posioning succeeded.
Steps
1.
Select Set → Network → Posioning .
2.
Enable Time Sync.
Body Camera User Manual
17