96
Connection Type
Select the Connection Type as IP, serialPort or PSTN to set connection mode.
Protocol Type
Select the Protocol Type as ADM-CID, ISUP, SIA-DCS, *SIA-DCS, *ADM-CID, CSV-IP, FSK
Module, RDC Module, PSTN-CID, RDC Module-CID or FSK Module-CID to set uploading mode.
GMT
Enable the Greenwich Mean Time.
Address Type
Select the Address Type as IP Address and Domain Name. Enter server address/domain name,
port number and account code.
Transmission Mode
Select the Transmission Mode as TCP or UDP. UDP is recommended by the SIA DC-09
standard.
Impulse Counting Time
After the selected time, the system will retry to transmit.
Attempts
Set the number of retry attempts.
Polling Option
Set the polling rate with the range from 10 to 3888000 seconds. The system will report fault if
the time is over the limit. The status of device will be shown as offline.
Periodic Test
After enabling, you can set the time interval, setting how often to send a test event to the
ARC to ensure the connection.
Companies
Select the support company as None, Hungary-Multi Alarm Receiving Company or French
Alarm Receiving Company.
Intruder Verification as a Service
The SDK returns the URL address of the video storage after the PIRCAM composite video is
uploaded to the cloud. The control panel will add this URL in the additional field when
reporting the intruder verification to ARC. After receiving the URL, ARC can download the
video. The alarm video can be stored in the cloud for up to 7 days.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
