HIKVISION DS-PHA48-EP User Manual

35
3.1.4 Area Settings
Basic Settings
You can link zones to the selected area.
Steps
1. Click Area → Basic Settings to enter the page.
2. Select an area.
3. Check Enable.
4. Check the check box to select zones for the area.
5. Click Save.
3.1.5 Communication Settings
Wired Network
You can set the device IP address and other network parameters.
Steps
Note
Functions varied depending on the model of the device.
1. Click Communication→ Wired Network to enter the page.
2. Set the parameters.

HIKVISION DS-PHA48-EP Specifications

General

2G standards	GSM
Number of alarm zones	48
Alert notification type	SMS
Connectivity technology	Wired & Wireless
Mobile network generation	4G
Smartphone remote support	Yes
Number of simultaneous users	48 user(s)
Control type	-
Mounting type	Wall
Product color	White
Housing material	Plastic
Number of door/window sensors	- pc(s)
Battery life	36 h
Input voltage	100 - 240 V
Battery voltage	13.5 V
Battery capacity	7000 mAh

Weight and Dimensions

Alarm control panel weight	996.5 g
Alarm control panel dimensions (W x D x H)	261 x 86.4 x 261 mm