50
3.1.7 Maintenance
Device Upgrade
Only installer can upgrade the device on web client.
Steps:
1. Click Maintenance→ Device Information to enter the page.
2. Click Get Manufacturer PIN to view the PIN.
3. Click Remote Upgrade and enter the PIN.
4. Click OK to complete.
Note
Both of the users and configuration information will be retained after upgrade finished.
View Licenses
You can view device name and other information.
Click Maintenance → Device Information→ About to enter the page.
You can click View Licenses to view the source software licenses.
You can go to System → System settings to change the device name.
Local Log Search
You can search the log on the device.
Click Maintenance→ Log to enter the Local Log Search page.
To Next Page
Loading...
