77
Maintenance
1. In the site, tap the AX HYBRID PRO and then log in to the device (if required).
2. Tap →Maintenance →Maintenance.
Tamper Alarm on HPC Login
If enabled, an alarm will be triggered when the device is tampered after you log in to HPC.
Reboot Device
The AX HYBRID PRO will reboot.
Log
View device logs.
Device Upgrade
Steps
1. In the site, tap the AX HYBRID PRO and then log in to the device (if required).
2. Tap →Maintenance → Device Upgrade to upgrade the control panel, or tap
→Maintenance → Detector & Peripheral Upgrade to upgrade detectors and peripherals.
Remote Log Collection
Steps
1. In the site, tap the AX HYBRID PRO and then log in to the device (if required).
2. Tap →Maintenance → Remote Log Collection to enable the function.
Remote Log Collection is for getting logs relating to the device. When this is enabled, our technical
support will be able to collect logs relating to the device remotely and upload then to our server
for troubleshooting. You can set the validity period according to actual needs. This function will be
disabled after the set validity period.
3.3 Set-up with Hik-Connect
The operator can use the Hik-Connect to control the device, such as general arming/disarming
operation, and user management etc.
3.3.1 Download and Login the Mobile Client
Download the Hik-Connect mobile client and login the client before operating the AX HYBRID PRO.
Steps
1. Download Hik-Connect mobile client.
2. Optional: Register a new account if it is the first time you use the Hik-Connect mobile client.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
