105
Access level of Arming
The user in level 2 or 3 has the permission to arm or partly arm the system.
Arming Indication
The arming/disarming indicator keeps solid blue for 5s.
Reason of Arming Failure
● Intrusion detector triggered (excepts the detector on the exit route).
● Panic alarm device triggered.
● Lid opened (tamper) alarm occurred.
● Communication exception
● Main power supply exception
● Backup battery exception
● Alarm receiving fault
● Sounder fault
● Low battery of the keyfob
● Others
Arming with Fault
While the arming is stopped with fault, user in level 2 has the permission to arm the system with
fault (forced arming).
Forced arming only takes effect on the current arming operation.
The forced arming operation will be record in the event log.
To Next Page
Loading...
