HIKVISION DS-PS1-I-WB - Page 12

11
RSSI Instruction for Peripherals
With regards to EN 50131-5-3 4.2.2 Requirement for immunity to attenuation.
Signal Strength
RSSI Value
Indication
Remark
Strong
>120
Green
OK to install
Medium
81 to 120
Yellow
OK to install
Weak
60 to 80
Red
Not recommend to install, but can work
Invalid
0 to 59
Red (flash)
Not OK to install, cannot work normally
Note
Install peripherals only if the signal strength is above 80. For getting a much better system, install
at 120 and above.
AX PRO Notification Options
The AX PRO is suitable for the below notification requirements along with the required sounders
Notification
equipment
I&HAS Grade 2
Options
C
E
F
Self powered
audible WD
2
1
Optional
ATS
DP1
Optional
DP2