44
Main Page
You can view faults, arm and disarm areas, view device status, etc.
On the device list page, tap the AX PRO and then log in to the device (if required) to enter the
page.
Send Alarm
Tap to send alarm to Alarm Receiver Center and Hik-Connect users.
View Faults
Tap to view faults.
Area Management
Tap + to add an area.
Tap Area to enter the area management page. Refers to Set Arming/Disarming Schedule for
details.
Arm/Disarm the Area
Arm or disarm the area manually as you desired.
On the device list page, tap the AX PRO and then log in to the device (if required) to enter the Area
page.
Operations for a Single Area
To Next Page
Loading...
