51
Steps
1. On the device list page, tap the AX PRO and then log in to the device (if required) to enter the
page.
2. Tap → System → Configuration to enter the page.
3. Select device language and time zone.
4. Enable DST according to your needs.
DST
Daylight saving time (also called summer time) is the practice of advancing clocks during the
lighter months so that evenings have more daylight and mornings have less.
System Management
Steps
1. On the device list page, tap the AX PRO and then log in to the device (if required) to enter the
page.
2. Tap → System → System Options → System Management to enter the page.
Forced Auto Arm
After enabled, when the timed automatic arming starts, if there are an active faults in a zone,
the zone will be automatically bypass.
Note
You should disable the arming function in the Advanced Settings page. Or the AX PRO arming
with fault function cannot be valid.
Forced Arming
After enabled, when manual arming starts, if there are an active faults in a zone, the zone will
be automatically bypass.
System Status report
If the option is enabled, the device will upload report automatically when the AX PRO status is
changed.
Voice Prompt
If the option is enabled, the AX PRO will enable the text voice prompt.
You can set detailed prompt: Fault Prompt On Arming, Fault Prompt On Disarming, Fault
Prompt When Armed, Fault Prompt When Disarmed, Voice Prompt On Alarm.
System Volume
The available system volume range is from 0 to 10.
Audible Tamper Alarm
To Next Page
Loading...
Need help?
General
