70
Note
Standard DC-09 Protocol
ADM-CID: The data presenting method of DC-09 is CID, which is not encrypted and only for
uploading alarm report.
*ADM-CID: The data presenting method of DC-09 is CID, which is encrypted and only for
uploading alarm report.
SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is not
encrypted and only for uploading alarm report.
*SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is
encrypted and only for uploading alarm report.
ADM-CID or SIA-DCS: You should select the Alarm Receiver Type as IP or Domain name, and
enter the IP address, port number, account code, impulse counting time, attempts, polling rate.
Note
Set the polling rate with the range from 10 to 3888000 seconds.
ISUP, CSV-IP, or FSK: You do not need to set the protocol parameters.
*SIA-DCS or *ADM-CID You should select the Alarm Receiver Type as IP or Domain name, and
enter the IP address, port number, account code, impulse counting time, attempts, polling rate,
encryption arithmetic, password length and secret key.
Note
Set the polling rate with the range from 10 to 3888000 seconds.
4. Click Save.
Use PIRCAM to Upload Pictures or Videos
You can enable the PIRCAM function to upload pictures or videos.
1.
Upload Pictures
You can choose to upload 1 to 20 pictures.
(1)
Click Communication
→
Alarm Receiving Center to enter the page.
(2)
Slide the slider to enable the selected alarm receiver center.
(3)
Select the Protocol Type as SIA-DCS.
(4)
Select the Companies as French Alarm Receiving Company.
(5)
Click Save.
To Next Page
Loading...
Need help?
General
