92
Customize a name for the keyfob.
Permission Settings
Check different items to assign permissions.
Single Key Settings
Select from the drop-down list to set I key and II key's functions
Combination Keys Settings
Select from the drop-down list to set combination keys' functions.
4. Click OK.
5. Optional: Click to edit the keyfob information.
6. Optional: Delete a single keyfob or check multiple keyfobs and click Delete to delete the keyfobs
in batch.
Note
The communication of wireless devices like keyfob was identified by the SN number, which will
be encrypted during transmission. The SN number was leading with character Q to Z, and
following 8 digits, like Q02235774.Allowing for a maximum number of 100,000,000 (10 to the
power of 8 [digits]).
Add/Edit/Delete Tag
You can add tag to the AX PRO and you can use the Tag to arm/disarm the zone. You can also edit
the tag information or delete the tag from the AX PRO.
Note
The communication of tag was identified by the SN number, which will be encrypted during
transmission. The SN number was leading with 32 digits, and there are at most 4,294,967,296 SN
numbers can be identified.
Steps
1. Click Device → Tag to enter the management page.
2. Click Enroll and place a Tag on the Tag area of the AX PRO.
3. Customize a name for the Tag in the pop-up window.
4. Select the Tag type and Tag linked area.
5. Select the permission for the Tag.
Note
You should allocate at least a permission for the Tag.
6. Click OK and the tag information will be displayed in the list.
To Next Page
Loading...
