HIKVISION HF-VS409 User Manual

Steps
1.
Go to Conguraon → Network → Advanced Sengs → Alarm Server .
2.
Enter Desnaon IP or Host Name, URL, and Port.
3.
Oponal: Check Enable to enable ANR.
4.
Select Protocol.
Note
HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts the data
transmission during communicaon.
5.
Click Test to check if the IP or host is available.
6.
Click Save.
7.4.4 Video/Audio
Sengs
Follow the instrucons below to congure the video seng, audio sengs, ROI, Display info. on
Stream, etc.
Set Video Parameters
This part introduces the sengs of video parameters, such as, stream type, video encoding, and
resoluon.
Click Conguraon → Video/Audio → Video to enter the sengs page.
Stream Type
Select the stream type as Main Stream or Sub Stream.
Video Type
Select the stream type to video stream, or video & audio composite stream. The audio signal
will be recorded only when the Video Type is Video & Audio.
Resoluon
Select the resoluon of the video output.
Bitrate Type
Select the bitrate type to constant or variable.
Video Quality
When bitrate type is selected as Variable, 6 levels of video quality are selectable.
Video Frame Rate
Set the frame rate. The frame rate is to describe the frequency at which the video stream is
updated and it is measured by frames per second (fps). A higher frame rate is advantageous
when there is movement in the video stream, as it maintains image quality throughout.
Max. Bitrate
HF-VS409 Smoke Detected Camera User Manual
42

HIKVISION HF-VS409 Specifications

General

Brand	HIKVISION
Model	HF-VS409
Category	Digital Camera
Language	English