HIKVISION HF-VS409 - Image Settings

7.
Oponal: Select other region No. and repeat the above steps if you need to draw mulple xed
regions.
Display Info. on Stream
The informaon of the objects (e.g. human, vehicle, etc.) is marked in the video stream. You can
set rules on the connected rear-end device or client soware to detect the events including line
crossing, intrusion, etc.
Steps
1.
Click the
seng page: Conguraon → Video/Audio → Display Info. on Stream .
2.
Check Enable Smart Post Retrieval.
3.
Click Save.
7.4.5 Image
Sengs
Set Display Parameters
It oers the parameter sengs to adjust image features.
Click
Conguraon → Image → Display Sengs to enter the sengs page.
Image Adjustment
By adjusng the Brightness, Saturaon, Contrast and Sharpness, the image can be best
displayed.
Exposure
Sengs
Exposure is controlled by the combinaon of iris. You can adjust image eect by seng
exposure parameters.
Day/Night Switch
Day/Night Switch funcon can provide color images in the day mode and black/white images in
the night mode. Switch mode is
congurable.
Day
The image is always in color.
Night
The image is always black/white.
Auto
The camera switches between the day mode and the night mode according to the
illuminaon automacally.
Scheduled-Switch
Set the Start Time and the End Time to dene the duraon for day mode.
HF-VS409 Smoke Detected Camera User Manual
45