HIKVISION HF-VS409

3) Click Stop Drawing to nish drawing.
4.
Oponal: Click Clear All to clear all the congured privacy masks.
5.
Click Save.
Image Parameters Switch
The device automacally switches image parameters in set me periods.
Click Conguraon → Image → Image Parameters Switch , and set parameters as needed.
7.4.6 Event and Alarm Sengs
This part introduces the conguraon of events. The device takes certain response to triggered
alarm.
Schedule and Linkage
Sengs
Set Arming Schedule
Set the valid me of the device tasks.
Steps
1.
Click Arming Schedule.
2.
Drag the me bar to draw desired valid me.
Note
Up to 8 periods can be congured for one day.
3.
Adjust the me period.
-
Click on the selected me period, and enter the desired value. Click Save.
-
Click on the selected
me period. Drag the both ends to adjust the me period.
-
Click on the selected me period, and drag it on the me bar.
4.
Oponal: Click Copy to... to copy the same sengs to other days.
5.
Click Save.
Linkage Method
Sengs
You can enable the linkage funcons when an event or alarm occurs.
HF-VS409 Smoke Detected Camera User Manual
48