Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
12
3. Drag the corners of the area to adjust the size and shape.
Go to Live View interface to view the maximum temperature and rule of the area in thermal
channel.
3.4 Manual Thermography
After enable the manual thermography function of the device, you can click any position on the
live view to show the real temperature.
Steps
1. Go toConfiguration → Local and select Display Temperature Info. as Yes.
2. Go toConfiguration → Temperature Measurement → Basic Settings.
3. Check Enable Temperature Measurement.
4. Click Save.
5. Go to live view interface and select thermal channel, click . Click any position on the
interface to show the real temperature.
3.5 Search History Temperature
You can search the history temperature and generate the temperature/time graphic.
Before You Start
Refer to Set Memory Card and Set NAS to set the storage first.
Steps
1. Go to Configuration → Temperature Measurement → Search History Temperature.
2. Set the search parameters.
Preset
You can search the highest temperature information in normal mode. Or you can search the
temperature information of special presets in expert mode.
Start Time
Set the searching start time.
Display Time Interval
Display the temperature information for every setting time interval.
3. Click Search to generate the graphic.
4. Click Export to download the graphic.
To Next Page
Loading...
Need help?
General
