Network Camera User Manual
59
Log Searching
4. To export the log files, click Export to save the log files.
System Service
Purpose:
System service settings refer to the hardware service the camera supports. Supported
functions vary according to the different cameras. For the cameras support IR Light,
ABF (Auto Back Focus), Auto Defog, or Status LED, you can select to enable or
disable the corresponding service according to the actual demands.
ABF: When ABF function is enabled, you can click on PTZ control panel to
realize auxiliary focus.
Third Stream: For some models, third stream is not enabled by default. Check
Enable Third Stream to enable the function.
eMMC Protection: If you enable eMMC protection, the lifespan of the eMMC is
displayed.
Enable Motion Detection: Check Enable Motion Detection to enable the function.
To Next Page
Loading...
Need help?
General
