Smart ATM Protection System Quick Start Guide
20
Figure 2-14 Human Face Mode Rules Configuration
Step 6 Configure arming schedule. Refer to 2.2.1 Panel Mode for details.
Step 7 Configure linkage action. Refer to 2.2.1 Panel Mode for details.
The alarm events are analyzed independently by target.
If there are two persons before the ATM, and one person’s face is normal and the other
person’s face is abnormal, and one person is using the mobile phone, the normal face alarm,
abnormal face alarm, multiple faces alarm, and using mobile phone alarm will be triggered
respectively.
The normal face alarm, abnormal face alarm, and wearing sunglasses alarm of one target
will be triggered once. For example, if one person with normal face is operating the ATM,
the DVR will trigger normal face capture. Then even if he or she wears mask or sunglasses
during the process before leaving the ATM, other alarms will not be triggered.
2.2.3 Detailed Configuration of Smart ATM Rules
Draw the standing region of
the operator. Please place OSD
outside the region, and avoid
drawing the person who is not
To Next Page
Loading...
Need help?
General