HIKVISION iDS-7200AHQHI-M Series Quick Start Guide

Smart ATM Protection System Quick Start Guide
9
Step 4 Click VCA Config.
Step 5 Select VCA Resource Allocation.
Step 6 Check VCA.
Enable VCA would reduce the number of connectable IP cameras.
Figure 2-2 VCA Resource Allocation
Step 7 Select camera(s) for panel mode or face mode as your desire. You can view the available
ATM resource information in Resource Information.
Step 8 (Optional) Check or uncheck the modes to enable or disable the smart ATM modes.
Step 9 Click Done to save the settings.
2.2 Smart ATM Configuration
2.2.1 Panel Mode
Purpose
Panel mode detects the ATM panel situation, if abnormal event happens such as sticking scrip on
the panel, it will trigger alarm.
Before you start

HIKVISION iDS-7200AHQHI-M Series Specifications

General

Brand	HIKVISION
Model	iDS-7200AHQHI-M Series
Category	DVR
Language	English