EasyManuals Logo

HIKVISION iDS-7200AHQHI-M Series Quick Start Guide

HIKVISION iDS-7200AHQHI-M Series
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Smart ATM Protection System Quick Start Guide
6
range of 49 × 49 pixels to 192 × 192 pixels. The other resolution can be calculated according to
the proportion. The maximum face size should be within 4 times of the minimum face size.
The camera should monitor the front of the human face.
Avoid installing the camera to face the light or back the light. The human face image cannot
be too dark or too bright. It is recommended to use WDR camera in backlight.
The camera should display the complete faces of human with heights from 1.40 m to 2.0 m.
The typical human face image is shown as below.
Figure 1-2 Camera Installation for Human Face Mode
1.4 Typical Incorrect Installation of Human Face Mode
Table 1-2 Typical Incorrect Installation of Human Face Mode
No.
Problems
Suggestions
1
The installation does
not confirm to any
requirement of the
camera installation for
human face mode.
Reinstall the camera or
disable smart ATM analysis.
2
The camera is in
backlight, so the human
face image is not clear.
Use the WDR camera. If the
human face image is still not
clear after using WDR camera,
it is recommended to disable
smart ATM analysis.

Other manuals for HIKVISION iDS-7200AHQHI-M Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION iDS-7200AHQHI-M Series and is the answer not in the manual?

HIKVISION iDS-7200AHQHI-M Series Specifications

General IconGeneral
BrandHIKVISION
ModeliDS-7200AHQHI-M Series
CategoryDVR
LanguageEnglish

Related product manuals