HIKVISION iDS-7204AHQHI-M1 User Manual

Before You Start
Ensure the network connecon is valid and correct, and the network camera is acvated.
Steps
1. Click
on the main menu.
2. Click Custom Adding.
3. Set IP Camera Address, Protocol, Management Port, Transfer Protocol, User Name, and
Password. Management port ranges from 1 to 65535.
Figure 1-11 Add Network Camera
4. Oponal: Check Use Channel Default Password to use the default password to add the camera.
5.
Oponal: Check Use Default Port to use the default management port to add the camera. For
SDK service, the default port value is 8000. For enhanced SDK service, the default value is 8443.
Note
The funcon is only available when you use HIKVISION protocol.
6. Oponal: Check Verify Cercate to verify the camera with cercate. The cercate is a form
of idencaon for the camera that provides more secure camera authencaon. It requires to
import the network camera cercate to the NVR rst when you use this funcon. For details,
refer to .
Note
The funcon is only available when you use HIKVISION protocol.
7. Click Add.
8.
Oponal: Check Connue to Add to add other network cameras.
ATM Digital Video Recorder User Manual
9

HIKVISION iDS-7204AHQHI-M1 Specifications

General

Brand	HIKVISION
Model	iDS-7204AHQHI-M1
Category	DVR
Language	English