HIKVISION iDS-7204AHQHI-M1 User Manual

Figure 4-7 Line Crossing Detecon
3. Select a camera.
4. Check Enable Line Crossing Detecon.
5.
Oponal: Check Save VCA Picture to save the captured pictures of line crossing detecon.
6. Set the line crossing detecon rules and detecon areas.
1) Select an arming area.
2) Select
Direcon as A<->B, A->B, or A<-B.
A<->B
Only the arrow on the B side shows. When an object goes across the
congured line with
both direcons can be detected and alarms are triggered.
A->B
Only the object crossing the congured line from the A side to the B side can be detected.
B->A
Only the object crossing the congured line from the B side to the A side can be detected.
3) Set the
detecon sensivity. The higher the value is, the more easily the detecon alarm can
be triggered.
4) Click Draw Region.
5) Draw a virtual line in the preview window.
7.
Oponal: Draw the maximum size/minimum size for targets. Only the targets in the size ranging
from max.size to min. size will trigger line crossing
detecon.
1) Click Max. Size/Min. Size.
2) Draw an area in preview window.
3) Click Stop Drawing.
8. Set the arming schedule. Refer to
Congure Arming Schedule .
9. Set linkage acons. Refer to Congure Linkage Acons .
10. Click Apply.
ATM Digital Video Recorder User Manual
39

HIKVISION iDS-7204AHQHI-M1 Specifications

General

Brand	HIKVISION
Model	iDS-7204AHQHI-M1
Category	DVR
Language	English