EasyManuals Logo

HIKVISION iDS-7204AHQHI-M1 User Manual

HIKVISION iDS-7204AHQHI-M1
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Safety Instrucon
Proper
conguraon of all passwords and other security sengs is the responsibility of the
installer and/or user.
In the use of the product, you must be in strict compliance with the electrical safety
regulaons
of the naon and region. Please refer to technical specicaons for detailed informaon.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 100 VAC to 240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to
technical specicaons for detailed informaon.
Do not connect several devices to one power adapter as adapter overload may cause over-
heang or a re hazard.
Please make sure that the plug is rmly connected to the power socket.
If smoke, odor or noise rises from the device, turn
o the power at once and unplug the power
cable, and then please contact the service center.
ATM Digital Video Recorder User Manual
vii

Table of Contents

Other manuals for HIKVISION iDS-7204AHQHI-M1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION iDS-7204AHQHI-M1 and is the answer not in the manual?

HIKVISION iDS-7204AHQHI-M1 Specifications

General IconGeneral
BrandHIKVISION
ModeliDS-7204AHQHI-M1
CategoryDVR
LanguageEnglish

Related product manuals