Network Traffic Camera User Manual
11
4. Click Activate to activate the device.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a
strong password of your own choosing (using a minimum of 8 characters, including
upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password monthly or
weekly can better protect your product.
5. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking Enable DHCP.
Note:
DHCP (Dynamic Host Configuration Protocol) is a LAN network protocol using
UDP to work.
Figure 2-5 Create Password
6. Input the password and click Modify to activate your IP address modification.
To Next Page
Loading...
