HIKVISION iDS-TCM403-AI - Chapter 10 Text Overlay Configuration; Configure Single Picture Overlay

Network Traffic Camera User Manual
42
Chapter 10 Text Overlay
Configuration
Purpose:
Configure the OSD on the captured pictures and videos.
10.1 Configure Single Picture Overlay
Purpose:
You can configure the overlay information of the captured single picture.
Steps:
1. Go to Configuration > Device Configuration > Text Overlay > Single Picture
Overlay.
Figure 10-1 Single Picture Overlay
2. Check Capture Picture Overlay.
3. Configure the parameters below.
 Percentage: the percentage of the information overlaid on the picture.
 Font Size: the font size of the overlay information.
 Foreground Color: the foreground color of the overlay information.