HIKVISION iDS-TCM403-AI User Manual

64
Chapter 16 Maintenance
16.1 Check Device Status
Purpose:
You can check the device status.
Steps:
1. Go to Configuration > Device Status.
Figure 16-1 Device Status
2. View Device IP Address and Device Status.
 Device IP Address: Display the current IP address of the camera.
 Device Status: Detailed descriptions are shown in the following table.
Table 16-1 Description of Device Status
Item
Description
Live View Connection
The current number of established live view
connection.
Live View IP Address
The IP address of the PC that is viewing the live
video.
Arming Channel
The number of channel(s) that armed by arming
host(s).
Arming Host Address
The IP address of the host that enables the arming
channel.
Arming Level
Arming level 1 and arming level 2 are available.
Refer to Section 4.4 for detailed explanation.
16.2 Manage Users
The admin user should configure the device accounts and user/operator permissions
properly, and delete the unnecessary accounts and user/operator permissions.

HIKVISION iDS-TCM403-AI Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-AI
Category	Security Camera
Language	English