HIKVISION iDS-TCM403-AI User Manual

Network Traffic Camera User Manual
58
Chapter 14 Application Mode
Configuration
Purpose:
This chapter introduces the parameters configuration under different trigger mode.
The supported trigger modes vary according to the camera models.
Note:
The trigger modes below are for reference only. The trigger modes of the actual
device prevail.
14.1 Smart Mode
In this mode, target capture and license plate recognition are trigger by internal live
video analysis.
Steps:
1. Go to Configuration > Device Configuration > Application Mode.
2. Select Application Mode as Smart Mode.
3. Select Total Lanes. Up to 3 lanes are supported.
Figure 14-1 Smart Mode Configuration

HIKVISION iDS-TCM403-AI Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-AI
Category	Security Camera
Language	English