User Manual of Network Traffic Camera
12
Chapter 3 Login
Steps:
1. Open the web browser.
2. In the browser address bar, input the IP address of the camera, and press the Enter
key to enter the login interface.
3. Input User Name and Password.
4. Click Login.
The admin user should configure the device accounts and user/operator permissions
properly. Delete the unnecessary accounts and user/operator permissions.
Figure 3-1 Login Interface
5. Install the plug-in before viewing the live video and operating the camera. Please
follow the installation prompts to install the plug-in.
Note: You may have to close the web browser to install the plug-in. Please reopen
the web browser and log in again after installing the plug-in.
To Next Page
Loading...
