User Manual of Network Traffic Camera
22
Chapter 8 System Configuration
Purpose:
You can configure the parameters on this page, including device information, serial
ports, network parameters, time configuration, service, etc.
8.1 View Device Information
Go to the device information page to check the device information: Configuration >
Device Configuration > System Configuration > Device Information.
Device Name and Device No. can be changed as desired.
Other information of the camera, such as Model, Serial No., Firmware Version,
Encoding Version, Hardware Version, Number of Channels, Number of Trigger Input,
Number of Trigger Output, Smart Module Status, and Algorithms Library Version are
displayed for your reference. And the information cannot be edited in this menu.
To Next Page
Loading...
Need help?
General
